Skip to content

Step 2: Manage NebulaGraph Service

NebulaGraph supports managing services with scripts.

Enterpriseonly

You can also manage NebulaGraph with systemd in the NebulaGraph Enterprise Edition.

Danger

The two methods are incompatible. It is recommended to use only one method in a cluster.

Manage services with script

You can use the nebula.service script to start, stop, restart, terminate, and check the NebulaGraph services.

Note

nebula.service is stored in the /usr/local/nebula/scripts directory by default. If you have customized the path, use the actual path in your environment.

Syntax

$ sudo /usr/local/nebula/scripts/nebula.service
[-v] [-c <config_file_path>]
<start | stop | restart | kill | status>
<metad | graphd | storaged | all>
Parameter Description
-v Display detailed debugging information.
-c Specify the configuration file path. The default path is /usr/local/nebula/etc/.
start Start the target services.
stop Stop the target services.
restart Restart the target services.
kill Terminate the target services.
status Check the status of the target services.
metad Set the Meta Service as the target service.
graphd Set the Graph Service as the target service.
storaged Set the Storage Service as the target service.
all Set all the NebulaGraph services as the target services.

Manage services with systemd

For easy maintenance, NebulaGraph Enterprise Edition supports managing services with systemd. You can start, stop, restart, and check services with systemctl commands.

Note

  • After installing NebulaGraph Enterprise Edition, the .service files required by systemd are located in the etc/unit path in the installation directory. NebulaGraph installed with the RPM/DEB package automatically places the .service files into the path /usr/lib/systemd/system and the parameter ExecStart is generated based on the specified NebulaGraph installation path, so you can use systemctl commands directly.
  • The systemctl commands cannot be used to manage the Enterprise Edition cluster that is created with Dashboard of the Enterprise Edition.
  • Otherwise, users need to move the .service files manually into the directory /usr/lib/systemd/system, and modify the file path of the parameter ExecStart in the .service files.

Syntax

$ systemctl <start | stop | restart | status > <nebula | nebula-metad | nebula-graphd | nebula-storaged>
Parameter Description
start Start the target services.
stop Stop the target services.
restart Restart the target services.
status Check the status of the target services.
nebula Set all the NebulaGraph services as the target services.
nebula-metad Set the Meta Service as the target service.
nebula-graphd Set the Graph Service as the target service.
nebula-storaged Set the Storage Service as the target service.

Start NebulaGraph

Run the following command to start NebulaGraph.

$ sudo /usr/local/nebula/scripts/nebula.service start all
[INFO] Starting nebula-metad...
[INFO] Done
[INFO] Starting nebula-graphd...
[INFO] Done
[INFO] Starting nebula-storaged...
[INFO] Done

Users can also run the following command:

$ systemctl start nebula

If users want to automatically start NebulaGraph when the machine starts, run the following command:

$ systemctl enable nebula

Stop NebulaGraph

Danger

Do not run kill -9 to forcibly terminate the processes. Otherwise, there is a low probability of data loss.

Run the following command to stop NebulaGraph.

$ sudo /usr/local/nebula/scripts/nebula.service stop all
[INFO] Stopping nebula-metad...
[INFO] Done
[INFO] Stopping nebula-graphd...
[INFO] Done
[INFO] Stopping nebula-storaged...
[INFO] Done

Users can also run the following command:

$ systemctl stop nebula

Check the service status

Run the following command to check the service status of NebulaGraph.

$ sudo /usr/local/nebula/scripts/nebula.service status all
  • NebulaGraph is running normally if the following information is returned.

    INFO] nebula-metad(33fd35e): Running as 29020, Listening on 9559
    [INFO] nebula-graphd(33fd35e): Running as 29095, Listening on 9669
    [WARN] nebula-storaged after v3.0.0 will not start service until it is added to cluster.
    [WARN] See Manage Storage hosts:ADD HOSTS in https://docs.nebula-graph.io/
    [INFO] nebula-storaged(33fd35e): Running as 29147, Listening on 9779
    

    Note

    After starting NebulaGraph, the port of the nebula-storaged process is shown in red. Because the nebula-storaged process waits for the nebula-metad to add the current Storage service during the startup process. The Storage works after it receives the ready signal. Starting from NebulaGraph 3.0.0, the Meta service cannot directly read or write data in the Storage service that you add in the configuration file. The configuration file only registers the Storage service to the Meta service. You must run the ADD HOSTS command to enable the Meta to read and write data in the Storage service. For more information, see Manage Storage hosts.

  • If the returned result is similar to the following one, there is a problem. You may also go to the NebulaGraph community for help.
    [INFO] nebula-metad: Running as 25600, Listening on 9559
    [INFO] nebula-graphd: Exited
    [INFO] nebula-storaged: Running as 25646, Listening on 9779
    

Users can also run the following command:

$ systemctl status nebula
● nebula.service
   Loaded: loaded (/usr/lib/systemd/system/nebula.service; disabled; vendor preset: disabled)
   Active: active (exited) since  2022-03-28 04:13:24 UTC; 1h 47min ago
  Process: 21772 ExecStart=/usr/local/ent-nightly/scripts/nebula.service start all (code=exited, status=0/SUCCESS)
 Main PID: 21772 (code=exited, status=0/SUCCESS)
    Tasks: 325
   Memory: 424.5M
   CGroup: /system.slice/nebula.service
           ├─21789 /usr/local/ent-nightly/bin/nebula-metad --flagfile /usr/local/ent-nightly/etc/nebula-metad.conf
           ├─21827 /usr/local/ent-nightly/bin/nebula-graphd --flagfile /usr/local/ent-nightly/etc/nebula-graphd.conf
           └─21900 /usr/local/ent-nightly/bin/nebula-storaged --flagfile /usr/local/ent-nightly/etc/nebula-storaged.conf
3月 28 04:13:24 xxxxxx systemd[1]: Started nebula.service.
...

The NebulaGraph services consist of the Meta Service, Graph Service, and Storage Service. The configuration files for all three services are stored in the /usr/local/nebula/etc/ directory by default. You can check the configuration files according to the returned result to troubleshoot problems.

Next to do

Connect to NebulaGraph


Last update: August 11, 2022