Skip to content

Deploy Studio

This topic describes how to deploy Studio locally by RPM, DEB, tar package and Docker.

RPM-based Studio

Prerequisites

Before you deploy RPM-based Studio, you must confirm that:

  • The Linux distribution is CentOS, install lsof.
  • Before the installation starts, the following ports are not occupied.

    Port Description
    7001 Web service provided by Studio.

Install

  1. Select and download the RPM package according to your needs. It is recommended to select the latest version. Common links are as follows:

    Installation package Checksum NebulaGraph version
    nebula-graph-studio-3.6.0.x86_64.rpm nebula-graph-studio-3.6.0.x86_64.rpm.sha256 3.4.1
  2. Use sudo rpm -i <rpm_name> to install RPM package.

    For example, install Studio 3.6.0, use the following command. The default installation path is /usr/local/nebula-graph-studio.

    $ sudo rpm -i nebula-graph-studio-3.6.0.x86_64.rpm
    

    You can also install it to the specified path using the following command:

    $ sudo rpm -i nebula-graph-studio-3.6.0.x86_64.rpm --prefix=<path> 
    

    When the screen returns the following message, it means that the PRM-based Studio has been successfully started.

    Start installing NebulaGraph Studio now...
    NebulaGraph Studio has been installed.
    NebulaGraph Studio started automatically.
    
  3. When Studio is started, use http://<ip address>:7001 to get access to Studio.

    If you can see the Config Server page on the browser, Studio is started successfully.

    The Config Server page shows that Studio is started successfully

Uninstall

You can uninstall Studio using the following command:

$ sudo rpm -e nebula-graph-studio-3.6.0.x86_64

If these lines are returned, PRM-based Studio has been uninstalled.

NebulaGraph Studio removed, bye~

Exception handling

If the automatic start fails during the installation process or you want to manually start or stop the service, use the following command:

  • Start the service manually
    $ bash /usr/local/nebula-graph-studio/scripts/rpm/start.sh
    
  • Stop the service manually
    $ bash /usr/local/nebula-graph-studio/scripts/rpm/stop.sh
    

If you encounter an error bind EADDRINUSE 0.0.0.0:7001 when starting the service, you can use the following command to check port 7001 usage.

$ lsof -i:7001

If the port is occupied and the process on that port cannot be terminated, you can use the following command to change Studio service port and restart the service.

//Open the configuration file
$ vi etc/studio-api.yam

//Change the port
Port: 7001 // Modify this port number and change it to any 

//Restart service
$ systemctl restart nebula-graph-studio.service

DEB-based Studio

Prerequisites

Before you deploy DEB-based Studio, you must do a check of these:

  • The Linux distribution is Ubuntu.
  • Before the installation starts, the following ports are not occupied.

    Port Description
    7001 Web service provided by Studio
  • The path /usr/lib/systemd/system exists in the system. If not, create it manually.

Install

  1. Select and download the DEB package according to your needs. It is recommended to select the latest version. Common links are as follows:

    Installation package Checksum NebulaGraph version
    nebula-graph-studio-3.6.0.x86_64.deb nebula-graph-studio-3.6.0.x86_64.deb.sha256 3.4.1
  2. Use sudo dpkg -i <deb_name> to install DEB package.

    For example, install Studio 3.6.0, use the following command:

    $ sudo dpkg -i nebula-graph-studio-3.6.0.x86_64.deb
    
  3. When Studio is started, use http://<ip address>:7001 to get access to Studio.

    If you can see the Config Server page on the browser, Studio is started successfully.

    The Config Server page shows that Studio is started successfully

Uninstall

You can uninstall Studio using the following command:

$ sudo dpkg -r nebula-graph-studio

tar-based Studio

Prerequisites

Before you deploy tar-based Studio, you must do a check of these:

  • Before the installation starts, the following ports are not occupied.

    Port Description
    7001 Web service provided by Studio

Install and deploy

  1. Select and download the tar package according to your needs. It is recommended to select the latest version. Common links are as follows:

    Installation package Studio version
    nebula-graph-studio-3.6.0.x86_64.tar.gz 3.6.0
  2. Use tar -xvf to decompress the tar package.

    $ tar -xvf nebula-graph-studio-3.6.0.x86_64.tar.gz
    
  3. Deploy and start nebula-graph-studio.

    $ cd nebula-graph-studio
    $ ./server
    
  4. When Studio is started, use http://<ip address>:7001 to get access to Studio.

    If you can see the Config Server page on the browser, Studio is started successfully.

    The Config Server page shows that Studio is started successfully

Stop Service

You can use kill pid to stop the service:

$ kill $(lsof -t -i :7001) #stop nebula-graph-studio

Docker-based Studio

Prerequisites

Before you deploy Docker-based Studio, you must do a check of these:

  • Before the installation starts, the following ports are not occupied.

    Port Description
    7001 Web service provided by Studio

Procedure

To deploy and start Docker-based Studio, run the following commands. Here we use NebulaGraph v3.4.1 for demonstration:

  1. Download the configuration files for the deployment.

    Installation package NebulaGraph version
    nebula-graph-studio-3.6.0.tar.gz 3.4.1
  2. Create the nebula-graph-studio-3.6.0 directory and decompress the installation package to the directory.

    $ mkdir nebula-graph-studio-3.6.0 -zxvf nebula-graph-studio-3.6.0.gz -C nebula-graph-studio-3.6.0
    
  3. Change to the nebula-graph-studio-3.6.0 directory.

    $ cd nebula-graph-studio-3.6.0
    

  4. Pull the Docker image of Studio.

    $ docker-compose pull
    
  5. Build and start Docker-based Studio. In this command, -d is to run the containers in the background.

    $ docker-compose up -d
    

    If these lines are returned, Docker-based Studio v3.x is deployed and started.

    Creating docker_web_1      ... done
    
  6. When Docker-based Studio is started, use http://<ip address>:7001 to get access to Studio.

    Note

    Run ifconfig or ipconfig to get the IP address of the machine where Docker-based Studio is running. On the machine running Docker-based Studio, you can use http://localhost:7001 to get access to Studio.

    If you can see the Config Server page on the browser, Docker-based Studio is started successfully.

    The Config Server page shows that Docker-based Studio is started successfully

Helm-based Studio

This section describes how to deploy Studio with Helm.

Prerequisites

Before installing Studio, you need to install the following software and ensure the correct version of the software:

Software Requirement
Kubernetes >= 1.14
Helm >= 3.2.0

Install

  1. Use Git to clone the source code of Studio to the host.

    $ git clone https://github.com/vesoft-inc/nebula-studio.git
    
  2. Make the nebula-studio directory the current working directory.

    bash $ cd nebula-studio

  3. Assume using release name:my-studio, installed Studio in Helm Chart.

    $ helm upgrade --install my-studio --set service.type=NodePort --set service.port=30070deployment/helm
    

    The configuration parameters of the Helm Chart are described below.

    Parameter Default value Description
    replicaCount 0 The number of replicas for Deployment.
    image.nebulaStudio.name vesoft/nebula-graph-studio The image name of nebula-graph-studio.
    image.nebulaStudio.version v3.6.0 The image version of nebula-graph-studio.
    service.type ClusterIP The service type, which should be one of NodePort, ClusterIP, and LoadBalancer.
    service.port 7001 The expose port for nebula-graph-studio's web.
    service.nodePort 32701 The proxy port for accessing nebula-studio outside kubernetes cluster.
    resources.nebulaStudio {} The resource limits/requests for nebula-studio.
    persistent.storageClassName "" The name of storageClass. The default value will be used if not specified.
    persistent.size 5Gi The persistent volume size.
  4. When Studio is started, use http://<node_address>:30070/ to get access to Studio.

    If you can see the Config Server page on the browser, Studio is started successfully.

    The Config Server page shows that Studio is started successfully

Uninstall

 $ helm uninstall my-studio

Next to do

On the Config Server page, connect Docker-based Studio to NebulaGraph. For more information, see Connect to NebulaGraph.


Last update: February 19, 2024