Graph data modeling suggestions¶
This topic provides general suggestions for modeling data in NebulaGraph.
Note
The following suggestions may not apply to some special scenarios. In these cases, find help in the NebulaGraph community.
Model for performance¶
There is no perfect method to model in Nebula Graph. Graph modeling depends on the questions that you want to know from the data. Your data drives your graph model. Graph data modeling is intuitive and convenient. Create your data model based on your business model. Test your model and gradually optimize it to fit your business. To get better performance, you can change or re-design your model multiple times.
Design and evaluate the most important queries¶
Usually, various types of queries are validated in test scenarios to assess the overall capabilities of the system. However, in most production scenarios, there are not many types of frequently used queries. You can optimize the data model based on key queries selected according to the Pareto (80/20) principle.
Full-graph scanning avoidance¶
Graph traversal can be performed after one or more vertices/edges are located through property indexes or VIDs. But for some query patterns, such as subgraph and path query patterns, the source vertex or edge of the traversal cannot be located through property indexes or VIDs. These queries find all the subgraphs that satisfy the query pattern by scanning the whole graph space which will have poor query performance. NebulaGraph does not implement indexing for the graph structures of subgraphs or paths.
No predefined bonds between Tags and Edge types¶
Define the bonds between Tags and Edge types in the application, not NebulaGraph. There are no statements that could get the bonds between Tags and Edge types.
Tags/Edge types predefine a set of properties¶
While creating Tags or Edge types, you need to define a set of properties. Properties are part of the NebulaGraph Schema.
Control changes in the business model and the data model¶
Changes here refer to changes in business models and data models (meta-information), not changes in the data itself.
Some graph databases are designed to be Schema-free, so their data modeling, including the modeling of the graph topology and properties, can be very flexible. Properties can be re-modeled to graph topology, and vice versa. Such systems are often specifically optimized for graph topology access.
NebulaGraph 3.3.0 is a strong-Schema (row storage) system, which means that the business model should not change frequently. For example, the property Schema should not change. It is similar to avoiding ALTER TABLE in MySQL.
On the contrary, vertices and their edges can be added or deleted at low costs. Thus, the easy-to-change part of the business model should be transformed to vertices or edges, rather than properties.
For example, in a business model, people have relatively fixed properties such as age, gender, and name. But their contact, place of visit, trade account, and login device are often changing. The former is suitable for modeling as properties and the latter as vertices or edges.
Set temporary properties through self-loop edges¶
As a strong Schema system, NebulaGraph does not support List-type properties. And using ALTER TAG costs too much. If you need to add some temporary properties or List-type properties to a vertex, you can first create an edge type with the required properties, and then insert one or more edges that direct to the vertex itself. The figure is as follows.
To retrieve temporary properties of vertices, fetch from self-loop edges. For example:
//Create the edge type and insert the loop property.
nebula> CREATE EDGE IF NOT EXISTS temp(tmp int);
nebula> INSERT EDGE temp(tmp) VALUES "player100"->"player100"@1:(1);
nebula> INSERT EDGE temp(tmp) VALUES "player100"->"player100"@2:(2);
nebula> INSERT EDGE temp(tmp) VALUES "player100"->"player100"@3:(3);
//After the data is inserted, you can query the loop property by general query statements, for example:
nebula> GO FROM "player100" OVER temp YIELD properties(edge).tmp;
+----------------------+
| properties(EDGE).tmp |
+----------------------+
| 1 |
| 2 |
| 3 |
+----------------------+
//If you want the results to be returned in the form of a List, you can use a function, for example:
nebula> MATCH (v1:player)-[e:temp]->() return collect(e.tmp);
+----------------+
| collect(e.tmp) |
+----------------+
| [1, 2, 3] |
+----------------+
About dangling edges¶
A dangling edge is an edge that only connects to a single vertex and only one part of the edge connects to the vertex.
In NebulaGraph 3.3.0, dangling edges may appear in the following two cases.
-
Insert edges with INSERT EDGE statement before the source vertex or the destination vertex exists.
-
Delete vertices with DELETE VERTEX statement and the
WITH EDGEoption is not used. At this time, the system does not delete the related outgoing and incoming edges of the vertices. There will be dangling edges by default.
Dangling edges may appear in NebulaGraph 3.3.0 as the design allow it to exist. And there is no MERGE statement like openCypher has. The existence of dangling edges depends entirely on the application level. You can use GO and LOOKUP statements to find a dangling edge, but cannot use the MATCH statement to find a dangling edge.
Examples:
// Insert an edge that connects two vertices which do not exist in the graph. The source vertex's ID is '11'. The destination vertex's ID is'13'.
nebula> CREATE EDGE IF NOT EXISTS e1 (name string, age int);
nebula> INSERT EDGE e1 (name, age) VALUES "11"->"13":("n1", 1);
// Query using the `GO` statement
nebula> GO FROM "11" over e1 YIELD properties(edge);
+----------------------+
| properties(EDGE) |
+----------------------+
| {age: 1, name: "n1"} |
+----------------------+
// Query using the `LOOKUP` statement
nebula> LOOKUP ON e1 YIELD EDGE AS r;
+-------------------------------------------------------+
| r |
+-------------------------------------------------------+
| [:e2 "11"->"13" @0 {age: 1, name: "n1"}] |
+-------------------------------------------------------+
// Query using the `MATCH` statement
nebula> MATCH ()-[e:e1]->() RETURN e LIMIT 100;
+---+
| e |
+---+
+---+
Empty set (time spent 3153/3573 us)
Breadth-first traversal over depth-first traversal¶
- NebulaGraph has lower performance for depth-first traversal based on the Graph topology, and better performance for breadth-first traversal and obtaining properties. For example, if model A contains properties "name", "age", and "eye color", it is recommended to create a tag
personand add propertiesname,age, andeye_colorto it. If you create a tageye_colorand an edge typehas, and then create an edge to represent the eye color owned by the person, the traversal performance will not be high.
- The performance of finding an edge by an edge property is close to that of finding a vertex by a vertex property. For some databases, it is recommended to re-model edge properties as those of the intermediate vertices. For example, model the pattern
(src)-[edge {P1, P2}]->(dst)as(src)-[edge1]->(i_node {P1, P2})-[edge2]->(dst). With NebulaGraph 3.3.0, you can use(src)-[edge {P1, P2}]->(dst)directly to decrease the depth of the traversal and increase the performance.
Edge directions¶
To query in the opposite direction of an edge, use the following syntax:
(dst)<-[edge]-(src) or GO FROM dst REVERSELY.
If you do not care about the directions or want to query against both directions, use the following syntax:
(src)-[edge]-(dst) or GO FROM src BIDIRECT.
Therefore, there is no need to insert the same edge redundantly in the reversed direction.
Set tag properties appropriately¶
Put a group of properties that are on the same level into the same tag. Different groups represent different concepts.
Use indexes correctly¶
Using property indexes helps find VIDs through properties, but can lead to great performance reduction. Only use an index when you need to find vertices or edges through their properties.
Design VIDs appropriately¶
See VID.
Long texts¶
Do not use long texts to create edge properties. Edge properties are stored twice and long texts lead to greater write amplification. For how edges properties are stored, see Storage architecture. It is recommended to store long texts in HBase or Elasticsearch and store its address in NebulaGraph.
Dynamic graphs (sequence graphs) are not supported¶
In some scenarios, graphs need to have the time information to describe how the structure of the entire graph changes over time.1
The Rank field on Edges in NebulaGraph 3.3.0 can be used to store time in int64, but no field on vertices can do this because if you store the time information as property values, it will be covered by new insertion. Thus NebulaGraph does not support sequence graphs.
Free graph data modeling tools¶
-
https://blog.twitter.com/engineering/en_us/topics/insights/2021/temporal-graph-networks ↩