Deploy Dashboard

The deployment of Dashboard involves five services. This topic will describe how to deploy Dashboard in detail. To download and compile the latest source code of Nebula Dashboard, follow the instructions on the nebula dashboard GitHub page.

Prerequisites

Before you deploy Dashboard, you must confirm that:

• The NebulaGraph services are deployed and started. For more information, see NebulaGraph Database Manual.

• Before the installation starts, the following ports are not occupied.

  • 9200
  • 9100
  • 9090
  • 8090
  • 7003

• The Linux distribution is CentOS, installed with Node.js of version above v10.12.0 and Go of version above 1.13.

Download Dashboard

Download the tar package as needed, and it is recommended to select the latest version.

Dashboard package	NebulaGraph version
nebula-dashboard-1.1.0.x86_64.tar.gz	2.5.1~3.0.0

Service

Run tar -xvf nebula-dashboard-1.1.0.x86_64.tar.gz to decompress the installation package. There are four services in the nebula-dashboard/vendors. The descriptions are as follows.

|Name|Description||Port| |:---|:---|:---| |node-exporter | Collects the source information of machines in the cluster, including the CPU, memory, load, disk, and network. |9100| |nebula-stats-exporter | Collects the performance metrics in the cluster, including the IP addresses, versions, and monitoring metrics (such as the number of queries, the latency of queries, the latency of heartbeats, and so on). |9200| |prometheus | The time series database that stores monitoring data. |9090| |nebula-http-gateway | Provides HTTP ports for cluster services to execute nGQL statements to interact with the NebulaGraph database. |8090|

The above four services should be deployed as follows.

Procedure

Deploy node-exporter

Note

You need to deploy the node-exporter service on each machine in the cluster.

To start the service, run the following statement in node-exporter:

$ nohup ./node-exporter --web.listen-address=":9100" &

After the service is started, you can enter <IP>:9100 in the browser to check whether the service is started normally.

Deploy nebula-stats-exporter

Note

You only need to deploy the nebula-stats-exporter service on the machine where the nebula-dashboard service is installed.

1. Modify the config.yaml file in nebula-stats-exporter to deploy the HTTP ports of all the services. The example is as follows:

   clusters:
     - name: nebula
       instances:
         - name: metad0
           endpointIP: 192.168.8.157
           endpointPort: 19559
           componentType: metad
         - name: metad1
           endpointIP: 192.168.8.155
           endpointPort: 19559
           componentType: metad
         - name: metad2
           endpointIP: 192.168.8.154
           endpointPort: 19559
           componentType: metad
         - name: graphd0
           endpointIP: 192.168.8.157
           endpointPort: 19669
           componentType: graphd
         - name: graphd1
           endpointIP: 192.168.8.155
           endpointPort: 19669
           componentType: graphd
         - name: graphd2
           endpointIP: 192.168.8.154
           endpointPort: 19669
           componentType: graphd
         - name: storaged0
           endpointIP: 192.168.8.157
           endpointPort: 19779
           componentType: storaged
         - name: storaged1
           endpointIP: 192.168.8.155
           endpointPort: 19779
           componentType: storaged
         - name: storaged2
           endpointIP: 192.168.8.154
           endpointPort: 19779
           componentType: storaged
   

2. Run the following statement to start the service:

   $ nohup  ./nebula-stats-exporter --listen-address=":9200" --bare-metal --bare-metal-config=./config.yaml &
   

After the service is started, you can enter <IP>:9200 in the browser to check whether the service is started normally.

Deploy prometheus

Note

You only need to deploy the prometheus service on the machine where the nebula-dashboard service is installed.

1. Modify the prometheus.yaml file in prometheus to deploy the IP addresses and ports of the node-exporter service and the nebula-stats-exporter. The example is as follows:

   global:
     scrape_interval:     5s
     evaluation_interval: 5s
   scrape_configs:
     - job_name: 'nebula-stats-exporter'
       static_configs:
         - targets: [
             '192.168.xx.100:9200',  # IP address and port of nebula-stats-exporter.
           ]
     - job_name: 'node-exporter'
       static_configs:
         - targets: [
             '192.168.xx.100:9100',  # IP address and port of node-exporter.
             '192.168.xx.101:9100'
           ]
   

   • scrape_interval: The interval for collecting the monitoring data, which is 1 minute by default.
   • evaluation_interval: The interval for running alert rules, which is 1 minute by default.

2. Run the following statement to start the service.

   $ nohup ./prometheus --config.file=./prometheus.yaml &
   

After the service is started, you can enter <IP>:9090 in the browser to check whether the service is started normally.

Deploy nebula-http-gateway

Note

You only need to deploy the nebula-http-gateway service on the machine where the nebula-dashboard service is installed.

To start the service, run the following statement in nebula-http-gateway:

$ nohup ./nebula-httpd &

After the service is started, you can enter <IP>:8090 in the browser to check whether the service is started normally.

How to deploy the nebula-dashboard service

1. Modify the config.json file in nebula-dashboard/ to deploy the IP address and port of the Graph Service and Proxy. The example is as follows:

     port: 7003
     proxy:
       gateway:
         target: "127.0.0.1:8090"  // The IP address and port of the gateway service.
       prometheus:
         target: "127.0.0.1:9090"  // The IP address and port of the prometheus service.
       nebulaServer:
         ip: "192.168.8.143"  // The IP of the machine where your NebulaGraph is deployed.
         port: 9669 // The port of the NebulaGraph.
     ...
   

2. To start the service, run the following statement in nebula-dashboard:

   $ nohup ./dashboard &
   

After the service is started, you can enter <IP>:7003 in the browser to check whether the service is started normally.

Stop Dashboard

You can enter kill <pid> to stop Dashboard. The examples are as follows:

$ kill $(lsof -t -i :9100) # stop the node-exporter service
$ kill $(lsof -t -i :9200) # stop the nebula-stats-exporter service
$ kill $(lsof -t -i :9090) # stop the prometheus service
$ kill $(lsof -t -i :8090) # stop the nebula-http-gateway service
$ kill $(lsof -t -i :7003) # stop dashboard service

---

Last update: March 13, 2023