Prepare resources for compiling, installing, and running NebulaGraph

This topic describes the requirements and suggestions for compiling and installing NebulaGraph, as well as how to estimate the resource you need to reserve for running a NebulaGraph cluster.

Requirements for compiling the NebulaGraph source code

Hardware requirements for compiling NebulaGraph

Item	Requirement
CPU architecture	x86_64
Memory	4 GB
Disk	10 GB, SSD

Supported operating systems for compiling NebulaGraph

For now, we can only compile NebulaGraph in the Linux system. We recommend that you use any Linux system with kernel version 4.15 or above.

Note

To install NebulaGraph on Linux systems with kernel version lower than required, use RPM/DEB packages or TAR files.

Software requirements for compiling NebulaGraph

You must have the correct version of the software listed below to compile NebulaGraph. If they are not as required or you are not sure, follow the steps in Prepare software for compiling NebulaGraph to get them ready.

Software	Version	Note
glibc	2.17 or above	You can run ldd --version to check the glibc version.
make	Any stable version	-
m4	Any stable version	-
git	Any stable version	-
wget	Any stable version	-
unzip	Any stable version	-
xz	Any stable version	-
readline-devel	Any stable version	-
ncurses-devel	Any stable version	-
zlib-devel	Any stable version	-
g++	8.5.0 or above	You can run gcc -v to check the gcc version.
cmake	3.14.0 or above	You can run cmake --version to check the cmake version.
curl	Any stable version	-
redhat-lsb-core	Any stable version	-
libstdc++-static	Any stable version	Only needed in CentOS 8+, RedHat 8+, and Fedora systems.
libasan	Any stable version	Only needed in CentOS 8+, RedHat 8+, and Fedora systems.
bzip2	Any stable version	-

Other third-party software will be automatically downloaded and installed to the build directory at the configure (cmake) stage.

Prepare software for compiling NebulaGraph

If part of the dependencies are missing or the versions does not meet the requirements, manually install them with the following steps. You can skip unnecessary dependencies or steps according to your needs.

1. Install dependencies.

   • For CentOS, RedHat, and Fedora users, run the following commands.

     $ yum update
     $ yum install -y make \
                      m4 \
                      git \
                      wget \
                      unzip \
                      xz \
                      readline-devel \
                      ncurses-devel \
                      zlib-devel \
                      gcc \
                      gcc-c++ \
                      cmake \
                      curl \
                      redhat-lsb-core \
                      bzip2
       // For CentOS 8+, RedHat 8+, and Fedora, install libstdc++-static and libasan as well
     $ yum install -y libstdc++-static libasan
     

   • For Debian and Ubuntu users, run the following commands.

     $ apt-get update
     $ apt-get install -y make \
                          m4 \
                          git \
                          wget \
                          unzip \
                          xz-utils \
                          curl \
                          lsb-core \
                          build-essential \
                          libreadline-dev \
                          ncurses-dev \
                          cmake \
                          gettext
     

2. Check if the GCC and cmake on your host are in the right version. See Software requirements for compiling NebulaGraph for the required versions.

   $ g++ --version
   $ cmake --version
   

   If your GCC and CMake are in the right versions, then you are all set and you can ignore the subsequent steps. If they are not, select and perform the needed steps as follows.

3. If the CMake version is incorrect, visit the CMake official website to install the required version.

4. If the G++ version is incorrect, visit the G++ official website or follow the instructions below to to install the required version.

   • For CentOS users, run:

     yum install centos-release-scl
     yum install devtoolset-11
     scl enable devtoolset-11 'bash'
     

   • For Ubuntu users, run:

     add-apt-repository ppa:ubuntu-toolchain-r/test
     apt install gcc-11 g++-11
     

Requirements and suggestions for installing NebulaGraph in test environments

Hardware requirements for test environments

Item	Requirement
CPU architecture	x86_64
Number of CPU core	4
Memory	8 GB
Disk	100 GB, SSD

Supported operating systems for test environments

For now, we can only install NebulaGraph in the Linux system. To install NebulaGraph in a test environment, we recommend that you use any Linux system with kernel version 3.9 or above.

Suggested service architecture for test environments

Process	Suggested number
metad (the metadata service process)	1
storaged (the storage service process)	1 or more
graphd (the query engine service process)	1 or more

For example, for a single-machine test environment, you can deploy 1 metad, 1 storaged, and 1 graphd processes in the machine.

For a more common test environment, such as a cluster of 3 machines (named as A, B, and C), you can deploy NebulaGraph as follows:

Machine name	Number of metad	Number of storaged	Number of graphd
A	1	1	1
B	None	1	1
C	None	1	1

Requirements and suggestions for installing NebulaGraph in production environments

Hardware requirements for production environments

Item	Requirement
CPU architecture	x86_64
Number of CPU core	48
Memory	96 GB
Disk	2 * 900 GB, NVMe SSD

Supported operating systems for production environments

For now, we can only install NebulaGraph in the Linux system. To install NebulaGraph in a production environment, we recommend that you use any Linux system with kernel version 3.9 or above.

Users can adjust some of the kernel parameters to better accommodate the need for running NebulaGraph. For more information, see kernel configuration.

Suggested service architecture for production environments

Danger

DO NOT deploy a cluster across IDCs.

Process	Suggested number
metad (the metadata service process)	3
storaged (the storage service process)	3 or more
graphd (the query engine service process)	3 or more

Each metad process automatically creates and maintains a replica of the metadata. Usually, you need to deploy three metad processes and only three.

The number of storaged processes does not affect the number of graph space replicas.

Users can deploy multiple processes on a single machine. For example, on a cluster of 5 machines (named as A, B, C, D, and E), you can deploy NebulaGraph as follows:

Machine name	Number of metad	Number of storaged	Number of graphd
A	1	1	1
B	1	1	1
C	1	1	1
D	None	1	1
E	None	1	1

Capacity requirements for running a NebulaGraph cluster

Users can estimate the memory, disk space, and partition number needed for a NebulaGraph cluster of 3 replicas as follows.

Resource	Unit	How to estimate	Description
Disk space for a cluster	Bytes	the_sum_of_edge_number_and_vertex_number * average_bytes_of_properties * 6 * 120%	-
Memory for a cluster	Bytes	[the_sum_of_edge_number_and_vertex_number * 16 + the_number_of_RocksDB_instances * (write_buffer_size * max_write_buffer_number + rocksdb_block_cache)] * 120%	write_buffer_size and max_write_buffer_number are RocksDB parameters. For more information, see MemTable. For details about rocksdb_block_cache, see Memory usage in RocksDB.
Number of partitions for a graph space	-	the_number_of_disks_in_the_cluster * disk_partition_num_multiplier	disk_partition_num_multiplier is an integer between 2 and 10 (both including). Its value depends on the disk performance. Use 2 for HDD.

• Question 1: Why do we multiply the disk space and memory by 120%?

  Answer: The extra 20% is for buffer.

• Question 2: How to get the number of RocksDB instances?

  Answer: Each directory in the --data_path item in the etc/nebula-storaged.conf file corresponds to a RocksDB instance. Count the number of directories to get the RocksDB instance number.

  Note

  Users can decrease the memory size occupied by the bloom filter by adding --enable_partitioned_index_filter=true in etc/nebula-storaged.conf. But it may decrease the read performance in some random-seek cases.

FAQ

About storage devices

NebulaGraph is designed and implemented for NVMe SSD. All default parameters are optimized for the SSD devices and require extremely high IOPS and low latency.

• Due to the poor IOPS capability and long random seek latency, HDD is not recommended. Users may encounter many problems when using HDD.

• Do not use remote storage devices, such as NAS or SAN. Do not connect an external virtual hard disk based on HDFS or Ceph.

• Do not use RAID.

• Use local SSD devices.

About CPU architecture

Enterpriseonly

Only NebulaGraph 3.0.0 Enterprise Eidtion can be run or compiled directly on ARM architectures (including Apple Mac M1 or Huawei Kunpeng). Contact inquiry@vesoft.com for business supports.

---

Last update: March 13, 2023