Skip to content

Connect to Nebula Graph

After successfully launching Explorer, you need to configure to connect to Nebula Graph. This topic describes how Explorer connects to the Nebula Graph database.

Prerequisites

Before connecting to the Nebula Graph database, you need to confirm the following information:

  • The Nebula Graph services and Explorer are started. For more information, see Deploy Explorer.
  • You have the local IP address and the port used by the Graph service of Nebula Graph. The default port is 9669.

  • You have a Nebula Graph account and its password.

    Note

    If authentication is enabled in Nebula Graph and different role-based accounts are created, you must use the assigned account to connect to Nebula Graph. If authentication is disabled, you can use the root and any password to connect to Nebula Graph. For more information, see Nebula Graph Database Manual.

Procedure

To connect Explorer to Nebula Graph, follow these steps:

  1. On the Config Server page of Explorer, configure these fields:

    • Host: Enter the IP address and the port of the Graph service of Nebula Graph. The valid format is IP:port. The default port is 9669.

      Note

      When Nebula Graph and Explorer are deployed on the same machine, you must enter the IP address of the machine, but not 127.0.0.1 or localhost, in the Host field.

    • Username and Password: Fill in the log in account according to the authentication settings of Nebula Graph.

      • If authentication is not enabled, you can use root and any password as the username and its password.
      • If authentication is enabled and no account information has been created, you can only log in as GOD role and use root and nebula as the username and its password.
      • If authentication is enabled and different users are created and assigned roles, users in different roles log in with their accounts and passwords.

    The Config Server page shows the fields to be configured for connection

  2. After the configuration, click the Login button.

    If you can see the interface as shown in the below, it means you have successfully connected to the Nebula Graph database.

    The Console page shows that the connection is successful

One session continues for up to 30 minutes. If you do not operate Explorer within 30 minutes, the active session will time out and you must connect to Nebula Graph again.

Last update: November 10, 2021
Back to top